SETup:CONTinuous
Last updated: January 16, 2009
GPIB Command Conventions
SETup[:ALL]:CONTinuous
|
Function
|
Sets/queries the trigger arm state for all measurements. Determines whether all measurements will make one measurement then stop (OFF (single)), or automatically rearm upon completion of one measurement and repeat the process (ON (continuous)).
This setting overrides previously set trigger arm settings for individual measurements.
|
|
Setting
|
Range: ON, OFF
|
|
Programming Example
OUTPUT 714;"SETup:ALL:CONTinuous:OFF" !Sets all measurements to single trigger mode.
|
|
top
of page