|
-200 Execution error
|
This event bit (Bit 4) indicates a PROGRAM DATA element following a header was outside the legal input range or otherwise inconsistent with the device's capabilities, see IEEE 488.2, 11.5.1.1.5.
|
|
-203 Command protected
|
Indicates that a legal password-protected program command or query could not be executed because the command was disabled.
|
|
-220 Parameter error
|
Indicates that a program data element related error occurred.
|
|
-221 Setting conflict
|
Indicates that a legal program data element was parsed but could not be executed due to the current device state.
|
|
-222 Data out of range
|
Indicates that a legal program data element was parsed but could not be executed because the interpreted value was outside the legal range defined by the devices |
|
-223 Too much data
|
Indicates that a legal program data element of block, expression, or string type was received that contained more data than the device could handle due to memory or related device-specific requirements.
|
|
-224 Illegal parameter value
|
Indicates that the value selected was not part of the list of values given.
|
|
-225 Out of memory |
The device has insufficient memory to perform the requested operation.
|
|
-226 Lists not the same length
|
Attempted to use LIST structure having individual LIST's of unequal lengths.
|
|
-230 Data corrupt or stale
|
Indicates invalid data, a new reading started but not completed since the last access.
|
|
-231 Data questionable
|
Indicates that measurement accuracy is suspect.
|
|
-233 Invalid version |
Indicates that a legal program data element was parsed but could not be executed because the version of the data is incorrect to the device. For example, a not supported file version, a not supported instrument version.
|
|
-240 Hardware error
|
Indicates that a legal program command or query could not be executed because of a hardware problem in the device.
|
|
-241 Hardware missing
|
Indicates that a legal program command or query could not be executed because of missing device hardware. For example, an option was not installed.
|
|
-250 Mass storage error
|
Indicates that a mass storage error occurred. The device cannot detect the more specific errors described for errors -251 through -259.
|
|
-251 Missing mass storage |
Indicates that a legal program command or query could not be executed because of missing mass storage. |
|
-252 Missing media |
Indicates that a legal program command or query could not be executed because of missing media. For example, no disk.
|
|
-253 Corrupt media
|
Indicates that a legal program command or query could not be executed because of corrupt media. For example, bad disk or wrong format.
|
|
-254 Media full
|
Indicates that a legal program command or query could not be executed because the media is full. For example, there is no room left on the disk.
|
|
-255 Directory full
|
Indicates that a legal program command or query could not be executed because the media directory was full.
|
|
-256 File name not found
|
Indicates that a legal program command or query could not be executed because the file name was not found on the media.
|
|
-257 File name error
|
Indicates that a legal program command or query could not be executed because the file name on the device media was in error. For example, an attempt was made to read or copy a nonexistent file.
|
|
-258 Media protected
|
Indicates that a legal program command or query could not be executed because the media was protected. For example, the write-protect switch on a memory card was set. |
|
-270 Macro error
|
Indicates that a macro related execution error occurred.
|
|
-271 Macro syntax error
|
Indicates that a syntactically legal macro program data sequence, according to IEEE 488.2, 10.7.2, could not be executed due to a syntax error within the macro definition.
|
|
-272 Macro execution error
|
Indicates that a syntactically legal macro program data sequence could not be executed due to some error in the macro definition, see IEEE 488.2, 10.7.6.3.
|
|
-273 Illegal macro label
|
Indicates that the macro label was not accepted, it did not agree with the definition in IEEE 488.2, 10.7.3
|
|
-274 Macro parameter error
|
Indicates that the macro definition improperly used a macro parameter placeholder, see IEEE 4882, 10.7.3.
|
|
-275 Macro definition too long
|
Indicates that a syntactically legal macro program data sequence could not be executed because the string of block contents were too long for the device to handle, IEEE 488.2, 10.7.6.1.
|
|
-276 Macro recursion error
|
Indicates that a syntactically legal macro program data sequence count not be executed because it would be recursive, see IEEE 488.2, 10.7.6.6.
|
|
-277 Macro redefinition not allowed
|
Indicates that redefining an existing macro label, see IEEE 488.2, 10.7.6.4.
|
|
-278 Macro header not found
|
Indicates that a legal macro label in the *GMS?, see IEEE 488.2, 10.13, could not be executed because the header was not previously defined.
|