Waveform Quality Troubleshooting

Waveform Quality Troubleshooting

Last updated: January 16, 2009

Possible Setup Issues

Other Considerations

Interpreting Integrity Indicator Values

If Over Range (5) is returned, the measured signal exceeds the expected input level or exceeds the maximum allowed input power for the test set.

If Under Range (6) is returned, the measured signal is below the expected input level.

If Cannot Correlate (17) is returned, the test set cannot demodulate the signal from the mobile station (UE). Make sure the uplink scrambling code from the mobile station matches the UL Scrambling setting on the test set (see CALL:UPLink ).

If Uncalibrated Due to Temperature (19) is returned, the temperature in the test set has changed by ± 10° C or more since the last calibration and should be calibrated again. See Calibrating the Test Set .

See Integrity Indicator .

Related Topics


Waveform Quality Measurement Description