DUT IP Setup
Last updated: January 16, 2009
This section is only applicable to the lab application.
DUT IP Address
See
DUT IP Address
for more information.
DNS Server IP Addresses
As part of the PS data call setup procedures, the UE can include PPP/IPCP messages that ask the network for the IP addresses of the DNS servers that it should use to resolve domain names. These PPP/IPCP messages are carried as part of the PDP Context Activation message and in them the UE can request either the Primary DNS Server address or the Secondary DNS Server address or both. If the UE requests either one or both of the DNS server addresses and they are set to 0.0.0.0, the test set does not respond to the UE, returns an error, and then proceeds with the PDP Context Activation. If the UE requests both of the DNS server addresses and either one contains a value other than 0.0.0.0, that address is sent to the UE.
These settings are non-volatile (they persist across partial and full presets and power-cycling the test set).
DUT Primary DNS Server IP Address
GPIB command:
CALL:MS:DNSServer:PRIMary:IP:ADDRess
DUT Secondary DNS Server IP Address
GPIB command:
CALL:MS:DNSServer:SECondary:IP:ADDRess
|
top
of page