How Do I Configure the Data Channel?
Last updated: January 16, 2009
This section is only applicable to the lab application.
GPRS Packet Data Service
-
Press the
CALL SETUP
key.
-
Press the
More
key on the left until you reach the
Call Parms
(
3 of 4
) menu.
-
Press
Data Channels
(
F4
).
-
Press
Packet Data Setup
(
F1
).
-
Set
GPRS Radio Access Bearer
to the desired value.
-
If you would like to simulate a network rejection of an Activate PDP Context Request from a UE, set
Activate PDP Context Reject State
to
On
, and set
Activate PDP Context Reject SM Cause
to the desired value.
-
Select
Close Menu
(
F6
).
CS (Circuit Switched) Data Service
-
Press the
CALL SETUP
key.
-
Press the
More
key on the left until you reach the
Call Parms
(
3 of 4
) menu.
-
Press
Data Channels
(
F4
).
-
Press
CS Data Setup
(
F2
).
-
Set the CS data settings as needed.
-
Select
Close Menu
(
F6
).
|
top
of page