Agilent Video Central
VideosEventsDiscussion ForumsRSS Feeds

Results Videos found: 48
60 GHz Power Amplifier Design for Wireless HDMI Webcast  60 GHz Power Amplifier Design for Wireless HDMI Webcast
The Wireless HDMI standard requires advanced design tools and technologies to meet its stringent performance requirements. This webinar covers the Agilent ADS tools and methodologies used to implement a 60 GHz 3-stage PA using TriQuint's TQP13-N foundry process design kits. For more information: http://www.agilent.com/find/eesof-ads For a free evaluation copy of ADS: http://www.agilent.com/find/eesof-ads-latest-downloads
Rating:  Views: 2470
 
Challenge #2: Make Launches Disappear (DesignCon 2010)  Challenge #2: Make Launches Disappear (DesignCon 2010)
Video footage from DesignCon 2010 featuring Eric Bogatin (Bogatin Enterprises) and Sangeev Gupta (Agilent)
Rating:  Not rated yet. Views: 683
 
EMPro Overview  EMPro Overview
EMPro is a 3D modeling environment that allows you to create 3D structures or import them from other CAD tools, then simulate with two different 3D EM simulators: Finite Element Method (FEM) and Finite Difference Time Domain (FDTD). EMPro is part of the ADS design flow. You can place fully parameterized 3D EM components from EMPro onto and ADS layout and run full 3D EM simulations directly from ADS, to analyze interactions between the 2D layout and 3D components, packages, connectors, etc.
Rating:  Views: 743
 
Genesys 2004-2009 Use Comparison  Genesys 2004-2009 Use Comparison
This video compares the use model of Genesys 2004 to Genesys 2009 including differences in the interface as well as areas of design such as schematic entry, analysis, data display, tuning and optimization.
Rating:  Views: 1253
 
Constant Power-Delivered Load Pull Simulation - Part 1  Constant Power-Delivered Load Pull Simulation - Part 1
How do you choose the best load to minimize bias current, maximize PAE, or minimize gain compression, all while delivering a particular power to the load? This video shows how to run 1-tone constant power-delivered load pull simulations with ADS and interpret the results.
Rating:  Views: 3278
 
Constant Power-Delivered Load Pull Simulation - Part 2  Constant Power-Delivered Load Pull Simulation - Part 2
How do you choose the best load to minimize bias current, maximize PAE, minimize gain compression, or minimize intermodulation distortion all while delivering a particular power to the load? This video shows how to run 2-tone constant power-delivered load pull simulations with ADS and interpret the results.
Rating:  Views: 1599
 
Bringing RF effects into Baseband DSP using SystemVue RFlink  Bringing RF effects into Baseband DSP using SystemVue RFlink
"RFlink" gives baseband/DSP designers access to accurate RF System Architecture models in their native signal processing environment. Watch how it’s done in this SystemVue tutorial. Uses the W1461 SystemVue software with the W1719 RF System option.
Rating:  Views: 2957
 
EMPro IMS 2009 demonstration  EMPro IMS 2009 demonstration
Introduces the FEM and FTDT engines integrated in EMPro and MIMO capabilities.
Rating:  Views: 3355
 
Genesys - What's New in Genesys 2009  Genesys - What's New in Genesys 2009
The video demonstrates the major new features in Genesys 2009. Completely new: Momentum GXF full featured NlogN, multithreaded EM solver, three new 3D viewers - 3D layout viewer, 3D current viewer and 3D antenna far field pattern viewer, new part properties and graph properties windows for easier part and graph management and ADS nonlinear model support. Note: Videos may not play properly inside company firewalls.(Search "Genesys" to see other videos)
Rating:  Views: 6709
 
Low-Cost High Performance RF/microwave design solutions with Genesys  Low-Cost High Performance RF/microwave design solutions with Genesys
Genesys, Momentum GFX 3D simulation demo. See single day turnaround from design, simulation to realization.
Rating:  Views: 5781
 
4G MIMO LTE Antenna and PCB Design using SystemVue 2009  4G MIMO LTE Antenna and PCB Design using SystemVue 2009
Agilent SystemVue 2009 used for FPGA prototype verification for TDD-LTE MIMO systems.
Rating:  Views: 6331
 
Discovering SystemVue - Importing SV2007 APG files into SV2009  Discovering SystemVue - Importing SV2007 APG files into SV2009
This product tutorial shows how to export a meta-network from an older version of System (2007.03) and import it into SystemVue 2009.05 or later. This allows re-use of important designs in the new platform.
Rating:  Not rated yet. Views: 1496
 
Discovering SystemVue - Speeding up RF Modulated Carriers by 1000x  Discovering SystemVue - Speeding up RF Modulated Carriers by 1000x
This product tutorial shows how the new W1461 SystemVue can speed up modulated carrier analysis by 1000x compared to older software programs, without loss of RF accuracy. This lets you do DSP on complex signals, such as WiMAX and LTE.
Rating:  Not rated yet. Views: 1523
 
Genesys Flow Part 3- M/Filter Synthesis and MomentumGX  Genesys Flow Part 3- M/Filter Synthesis and MomentumGX
This is the third and final in the Genesys Flow series. This video demonstrates the M/Filter distributed filter synthesis and MomentumGX 3D planar electromagnetic simulation and integration with the other Genesys tools. (Search "Genesys" to see other videos in this series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 2421
 
Genesys Flow Part 2 - Spectrasys RF System Architecture  Genesys Flow Part 2 - Spectrasys RF System Architecture
This part 2 in the Genesys RF Board Flow series. This part demonstrates how Spectrasys RF system architecture simulation tool fits into the flow and integrates with the other Genesys tools.(Search "Genesys" to view the other parts in the series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 2980
 
Genesys S/Filter Advanced Direct Filter Synthesis  Genesys S/Filter Advanced Direct Filter Synthesis
S/Filter is actually three filter synthesis tools: Filter for lumped LC Filters, M/Filter for distributed filters and S/Filter for both LC and distributed. The difference is Filter and M/Filter are limited to standard shapes such as Butterworth and Cheby, whereas S/Filter allows the designer freedom to design custom filter shapes. Designers can customize a response by placing transmission zeros where desired. This video covers just the S/Filter module.(Search "Genesys" for more videos in this series) Note: Videos may not play properly inside company firewalls.
Rating:  Views: 3085
 
Genesys Flow Part 1 - WhatIF Frequency Planner  Genesys Flow Part 1 - WhatIF Frequency Planner
This is the first in a multi-part series demonstrating the Genesys RF Board Flow. WhatIF is an easy to use synthesis tool that identifies mixer spurs and can identify Spur Free IF's in minutes.(Search "Genesys" to view other videos in this series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 3469
 
Genesys Getting Started Part 1  Genesys Getting Started Part 1
An introduction to the Genesys 2008 GUI and basics of the Genesys Core. See the "What's New in Genesys2009" video for changes to the Genesys parts and graphs dialog boxes.(Search "Genesys" to view other videos in this series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 4530
 
Genesys Getting Started Part 2  Genesys Getting Started Part 2
This video continues with the design in Genesys Getting Started Part 1 with advanced features and creates a layout of the schematic. See the "What's New in Genesys2009" video for changes to the Genesys parts and graphs dialog boxes and the new 3D layout viewer.(Search "Genesys" to see other parts of this series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 2353
 
Genesys Getting Started Part 3 - Graphs  Genesys Getting Started Part 3 - Graphs
This is part 3 in the Genesys Getting Started series and demonstates the extensive graphical capabilities within the Genesys Core. See the "What's New in Genesys2009" video for changes to the Genesys graphs dialog boxes.((Search "Genesys" to view other videos in this series)Note: Videos may not play properly inside company firewalls.
Rating:  Views: 2414
 
ADS 2009 Signal Integrity Eye Diagram Solutions  ADS 2009 Signal Integrity Eye Diagram Solutions
This video describes how to use Transient Simulation and Channel Simulation to characterize channels and data lines.
Rating:  Views: 6809
 
Discovering SystemVue - Easy DSP Algorithm Models in C++  Discovering SystemVue - Easy DSP Algorithm Models in C++
This product tutorial shows how to write & debug a custom DSP model in C++ and within 10 minutes, link it into the W1461 SystemVue Communications Architect software, for verification within a working Physical Layer dataflow.
Rating:  Views: 1567
 
DesignCon 09 ADS Demo  DesignCon 09 ADS Demo
From the tradeshow, this video captures the ADS demo
Rating:  Views: 3564
 
DesignCon 09 ADS Demo  DesignCon 09 ADS Demo
Video from DesignCon 09 on ADS
Rating:  Views: 1457
 
S-Parameter Simulation in Advanced Design System (Agilent EEsof EDA - 9)  S-Parameter Simulation in Advanced Design System (Agilent EEsof EDA - 9)
This video tutorial describes setting up and running S-parameter simulations in ADS.
Rating:  Views: 6465
 
More >>>
Filters - Industry:   Technology:   Product area: EDA

Genre:   Search phrase: