Setting - MOB_NRB-ADV msg.

This topic describes the following functions:

• Get/Set_BSHOOperatorID

• Get/Set_BSHONeighborADVCCC

• Get/Set_BSHONeighborReuseFactor_SBCCINR

E6651_Get/Set BSHOOperatorID

Declaration

int E6651_GetBSHOOperatorID(BYTE MID, int* Value);

int E6651_SetBSHOOperatorID(BYTE MID, int Value);

Parameter

MID [in]: User defined E6651A Machine ID

Value [out]: Current Operator ID of MOB_NBR-ADV message.

Value [in]: Operator ID of MOB_NBR-ADV message to be set.

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Retrieve or set the Operator ID of MOB_NBR-ADV message.

E6651_Get/Set BSHONeighborADVCCC

Declaration

int E6651_GetBSHONeighborADVCCC(BYTE MID, int* Value);

int E6651_SetBSHONeighborADVCCC(BYTE MID, int Value);

Parameter

MID [in]: User defined E6651A Machine ID

Value [out]: Current Configuration Change Count Value.

Value [in]: Set the Configuration Change Count Value.

Range

0 to 255

Default

0

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Retrieve or set the "Configuration Change Count" value, which is used for handover operation.

E6651_Get/Set BSHONeighborReuseFactor_SBCCINR

Declaration

int E6651_GetBSHONeighborReuseFactor_SBCCINR(BYTE MID, BYTE* Value);

int E6651_SetBSHONeighborReuseFactor_SBCCINR(BYTE MID, BYTE Value);

Parameter

MID [in]: User defined E6651A Machine ID

Value [out]: Current

Value [in]: Set the

Range

Default

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Retrieve or set the