Protocol FN Test - Handover

This topic describes the following functions:

• Get/Set_BSHOMOB_NBR_ADVEnable

• Get/Set_BSHOMOB_NBR_ADVRate

• SendBSHOMOB_SCN_RSP

• SendMOB_BSHO_REQ

E6651_Get/Set BSHOMOB_NBR_ADVEnable

Declaration

int E6651_GetBSHOMOB_NBR_ADVEnable(BYTE MID, int* Value);

int E6651_SetBSHOMOB_NBR_ADVEnable(BYTE MID, int Value);

Parameter

MID [in]: User defined E6651A Machine ID

Value [out]: Current Transmission mode of MOB_NBR-ADV message.

Value [in]: Transmission mode of MOB_NBR_ADV message to be set.

0 - Stop
1 - Start

Default

0, Stop

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Retrieve or set the Transmission mode of MOB_NBR-ADV message.

E6651_Get/Set BSHOMOB_NBR_ADVRate

Declaration

int E6651_GetBSHOMOB_NBR_ADVRate(BYTE MID, int* Value);

int E6651_SetBSHOMOB_NBR_ADVRate(BYTE MID, int Value);

Parameter

MID [in]: User defined E6651A Machine ID

Value [out]: Current Transmission Rate value of MOB_NBR-ADV message.

Value [in]: Transmission Rate value of MOB_NBR_ADV message to be set.

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Retrieve and set the Transmission Rate of the MOB_NBR-ADV message. Transmit once per Value Frames.

E6651_SendBSHOMOB_SCN_RSP

Declaration

int E6651_SendBSHOMOB_SCN_RSP(BYTE MID);

Parameter

MID [in]: User defined E6651A Machine ID

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Send the MOB_SCN-RSP Message.

E6651_SendMOB_BSHO_REQ

Declaration

int E6651_SendMOB_BSHO_REQ(BYTE MID);

Parameter

MID [in]: User defined E6651A Machine ID

Return Value

Success: STATE_SUCCESS(1)

Failure: STATE_ERROR(-1)

Description

Send the MOB_BSHO_REQ Message.