This section is only applicable to the lab application.
In
Active Cell
operating mode and
IS-856 Test
operating mode, the
Idle State Subtype In Use
shows you which protocol subtype of Idle State Protocol is currently in use or expected by the test set.
Cell Operating Mode
is set to
IS-856
_TM
,
Idle State Subtype In Use
represents the Idle State Subtype used to control the test set.
Cell Operating Mode
is set to
Active Cell
,
Idle State Subtype In Use
shows the Idle State Subtype in current use. When there is no session established, the test set is internally configured to
Default
. When there is a session negotiation, it is set to either
Enhanced
or
Inter-RAT
as appropriate. As for the case of Optimized Handoff from E-UTRAN to eHRPD in which the session is negotiated via S101 tunnel,
Idle State Subtype In Use
will be set to
Inter-RAT
.
It is displayed on the
Configurable Attribute Info
window on the
Access Network Info
screen or can be queried with
CALL:STATus:PROTocol:ISTate?
.
GPIB Command: CALL:STATus:PROTocol:ISTate?
Manual Operation: How Do I Change Cell Parameters?