To limit a call attempt to the access attempt state, see CALL:CONNected:LIMit[:STATe]<[:SELected]|:TA856> .
The setting form of this command performs two functions: (1) sets the measurement timeout value (see SETup:GAPPower:TIMeout:TIME ), and (2) sets the measurement timeout state to on (see SETup:GAPPower:TIMeout:STATe ). The query form of this command returns the measurement timeout value. If the timeout timer is not turned on, and an access probe is not received, the graphical access probe power measurement will hang on the FETCh? command indefinitely. For a description of the timeout, see Measurement Timeouts . |
|
OUTPUT 714;"SETup:GAPPower:TIMeout 5" !Sets timeout state to ON and timeout time to 5 seconds. |
Sets/queries the measurement timeout state. The measurement timeout state can also be set to on using the SETup:GAPPower:TIMeout[:STIMe] command. For a description of the timeout, see Measurement Timeouts . |
|
OUTPUT 714;"SETup:GAPPower:TIMeout:STATe ON" |
Sets/queries the measurement timeout value to be used when the timeout state is set to on. The measurement timeout state can also be set using the SETup:GAPPower:TIMeout[:STIMe] command. For a description of the timeout, see Measurement Timeouts . |
|
OUTPUT 714;"SETup:GAPPower:TIMeout:TIME 5" |