CALL:RCONfig

Function

Sets/queries the current radio configuration. See Radio Configuration .

The radio configuration specifies the base data rate and service options supported.

Data rates for the F-FCH can be set using the CALL:TRAFfic commands. Data rates for the F-SCH can be set using the CALL:SCHannel commands.

Radio configurations are often referred to in a shorthand terms. These terms are:

• RC1 (for F1R1)

• RC2 (for F2R2)

• RC3 (for F3R3)

• RC4 (for F4R3)

• RC5 (for F5R4)

• RC6 (for F11R8)

Setting

Range: F1R1|F2R2|F3R3|F4R3|F5R4|F11R8

Query

Range: F1R1|F2R2|F3R3|F4R3|F5R4|F11R8

*RST Setting

Requirements

Test Application Revision: B.18.00: Added F11R8

Lab Application Revision: D.01.00 or above: Added F11R8

Programming Example

 
OUTPUT 714;"CALL:CELL:RCONFIG F1R1" !Sets the radio configuration to RC1.