CALL:RLGain

Function

Sets/queries the channel adjustment gain for for R-ACK1, R-ACK2 and R-ACK3 when the number of cells in the active set exceeds 1. This parameter is Lab Application Only .

Setting

Range: -8.0 to +8.0 dB

Resolution: 0.125 dB

Query

Range: -8.0 to +8.0 dB

Resolution: 0.125 dB

*RST Setting

Requirements

Lab Application Revision: D.01.00 or above

Programming Example

 
OUTPUT 714;"CALL:RLGain:ACKChannel:ACS2plus 7.0" 

Function

Sets/queries the Channel Adjustment Gain for for R-ACK1, R-ACK2 and R-ACK3 when thenumber of cells in the active set equals 1.

Setting

Range: -8.0 to +8.0 dB

Resolution: 0.125 dB

Query

Range: -8.0 to +8.0 dB

Resolution: 0.125 dB

*RST Setting

Requirements

Test Application Revision: B.18.00 or above

Lab Application Revision: D.01.00 or above

Programming Example

 
OUTPUT 714;"CALL:RLGain:ACKChannel:ACSize1 7.0" 

Function

Sets/queries reverse link, traffic-to-pilot level (RLGAIN_TRAFFIC_PILOT) gain. This setting applies to R-FCH and/or R-SCH (if the test set is configured to recieve R-SCH, for example, IS-2000 Service Option is SO32 (+SCH).).

RLGAIN_TRAFFIC_PILOT is sent in an overhead message to the mobile station and is used by the mobile station to adjust the reverse traffic channel level, relative to the reverse channel pilot. This parameter applies only when the current radio configuration is greater than 2.

Each integer translates into a 1/8 dB step.

Setting

Range: -32 to +31

Resolution: integer

Query

Range:  -32 to+31

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:RLGain 8"