SETup:WDDeviation

SETup:WDDeviation

Last updated: May 10, 2010

GPIB Command Conventions

SETup:WDDeviation:CONTinuous

Function	Sets/queries the trigger arm state for the Wideband Data Deviation measurement. Determines whether measurement makes one measurement then stop (0\|OFF (single)), or automatically rearms upon completion of one measurement and repeats the process (1\|ON (continuous)).
Setting	Range: 1\|ON\|0\|OFF
Query	Range: 1\|0
*RST Setting	0 (off)
Requirement	Test Application Revision: B.09 and above Lab Application Revision: B.03 and above
Programming Example OUTPUT 714;"SETup:WDDeviation:CONTinuous ON" !Sets measurement to continuous trigger mode.

SETup:WDDeviation:GTIMe

Function	Sets/queries the gate time for Wideband Data Deviation measurements.
Setting	Range: 0.1 to 6.0 seconds Resolution: 0.1 second Step Size: 1.0 second
Query	Range: 0.1 to 6.0 seconds
*RST Setting	2.0 seconds
Requirement	Test Application Revision: B.09 and above Lab Application Revision: B.03 and above
Programming Example OUTPUT 714;"SETup:WDDeviation:GTIMe 5S"

SETup:WDDeviation:TIMeout[:STIMe]

Function	Sets/queries the Wideband Data Deviation measurement's timeout setting and automatically sets the timeout state to ON.
Setting	Range: 0.1 to 999.9 seconds Resolution: 0.1 second
Query	Range: 0.1 to 999.9
*RST Setting	10 seconds, off
Requirement	Test Application Revision: B.09 and above Lab Application Revision: B.03 and above
Programming Example OUTPUT 714;"SETup:WDDeviation:TIMeout 5S" !Sets timeout state to ON and sets the timeout time to 5 seconds.

SETup:WDDeviation:TIMeout:STATe

Function	Sets/queries the Wideband Data Deviation measurement's timeout state.
Setting	Range: 1\|ON\|0\|OFF
Query	Range: 1\|0
*RST Setting	0 (off)
Requirement	Test Application Revision: B.09 and above Lab Application Revision: B.03 and above
Programming Example OUTPUT 714;"SETup:WDDeviation:TIMeout:STATe ON"

SETup:WDDeviation:TIMeout:TIME

Function	Sets/queries the Wideband Data Deviation measurement's timeout setting to be used when the timeout state is set to ON.
Setting	Range: 0.1 to 999.9 seconds Resolution: 0.1 second
Query	Range: 0.1 to 999.9
*RST Setting	10 seconds
Requirement	Test Application Revision: B.09 and above Lab Application Revision: B.03 and above
Programming Example OUTPUT 714;"SETup:WDDeviation:TIMeout:TIME 5S"