Last updated: December 2, 2008
This section assumes the BCH parameter for Cell Band is set up correctly for your mobile station and the appropriate RF IN/OUT Amplitude Offsets have been set to offset the mobile station and the test set. For more information see How Do I Configure the Test Set for My Test System? .
Operating Mode
(
F1
) and choose Active Cell with a desired
Serving Cell
(
GSM
,
GPRS
, or
EGPRS
).
Handover Parameters
(
F10
) key.
GSM Handover Setup
(
F7
). To perform a handover with a GPRS data connection, press
GPRS Handover Setup
(
F8
).
Traffic Band
.
Handover Execute
(
F5
) key to complete the handover, or press the
Close Menu
(
F6
) key to abort the handover.
Active Cell
field for
Connected
if you made a GSM Handover, or
Transferring
if you made a GPRS Handover.