Last updated: December 3, 2008
This command is not applicable to the GSM Test Application. | ||
This command is not applicable to the GPRS Test Application. |
||
This command is not applicable to the EGPRS Test Application. |
||
Sets/queries the Network Operation Mode. See Configuring the Broadcast Channel (BCH) . This can only be set when the Cell Operating Mode is set to Cell Off (see CALL:OPERating:MODE ). See 3GPP TS 23.060 section 6.3.3.1 for more information about the network operation mode. |
||
Requirements | GSM/GPRS/EGPRS LA | |
OUTPUT 714;"CALL:CELL:NMOPERATION 2" ! Set the Network Operation Mode to 2. |