FETCh:TXPower

Function

Queries integrity indicator and burst power measurement result for the burst specified by Measurement Burst . This query returns the results in the following order: <Integrity>, <TX Burst Power>. If the Multi-measurement Count parameter is set to ON, the burst power multi-measurement average result is returned instead of the TX Burst Power result.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Integrity indicator

• Range: See Integrity Indicator .
• Resolution: 1

Burst power (average)

• Range: -100 to +100 dBm and 9.91E+37 (NAN)
• Resolution: 0.01 dB

Revision: A.01 and above

Revision: C.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:ALL?" 
! Query the integrity indicator and burst power measurement for the burst 
! specified by "Measurement Burst". 

Function

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 1 to 999

Resolution: 1

Revision: A.01 and above

Revision: C.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:ICOunt?" 
! Query the intermediate count of transmit power measurements completed.

Function

Queries the overall integrity indicator for all bursts under measurement. Zero indicates normal.

For non-zero integrity indicators, refer to Integrity Indicator .

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: See Integrity Indicator .

Resolution: 1

Revision: A.01 and above

Revision: C.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:INTegrity?" 
! Query the integrity indicator for all the burst under measurement. 

Function

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 1 to 100000.

Resolution: 1

Revision: A.08 and above

Revision: E.02 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:GFDTune:TRIGger:COUNt?" 
! Query the good protocol trigger number. 

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the modulation format for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: GMSK | EPSK | MIXed |UNKNown.

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:MODulation:FORMat? 2" 
! Query the modulation format for burst 2. 

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the modulation format for the whole TDMA frame.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: GMSK | EPSK | MIXed | UNKNown.

Resolution: Not Applicable

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:MODulation:FORMat:FRAMe? 
! Query the modulation format for the whole frame. 

Function

Queries the average, minimum, maximum and standard deviation of transmit power multi-measurement results for the specified burst. The query returns the power results in the following order: <Burst Power minimum>, <Burst Power maximum>, <Burst Power average>, <Burst Power standard deviation>.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Minimum:

• Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)
• Resolution: 0.01 dB

Maximum:

• Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)
• Resolution: 0.01 dB

Average:

• Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)
• Resolution: 0.01 dB

Standard deviation:

• Range: 0 dB to 100 dB and 9.91 E+37 (NAN)
• Resolution: 0.001 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:ALL? 2" 
! Query the average, minimum, maximum and standard deviation of the transmit power 
! multi-measurement results for burst 2. 

Function

Queries the average burst power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt? 2" 
! Query the average burst power for burst 2. 

Function

Queries the maximum burst power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:MAXimum? 2" 
! Query the maximum burst power for burst 2. 

Function

Queries the minimum burst power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:MINimum? 2" 
! Query the minimum burst power for burst 2. 

Function

Queries the standard deviation of burst power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:SDEViation? 2" 
! Query the standard deviation of the burst power for burst 2. 

Function

This command is only applicable when the Burst Capture Range is set to All.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:FRAMe? 
! Query the average burst power for the whole frame. 

Function

This command is only applicable when the Burst Capture Range is set to All.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:FRAMe:MAXimum? 
! Query the maximum burst power for the whole frame .

Function

This command is only applicable when the Burst Capture Range is set to All.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:FRAMe:MINimum? 
! Query the minimum burst power for the whole frame .

Function

This command is only applicable when the Burst Capture Range is set to All.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:BURSt:FRAMe:SDEViation? 
! Query the standard deviation of the burst power for the whole frame.

Function

When the Burst Capture Range is set to All, this command queries the average Estimated Carrier Power for the specified burst.

When the Burst Capture Range is set to Single, this command queries the average Burst Power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier? 2 
! Query the average Estimated Carrier Power for burst 2.

Function

When the Burst Capture Range is set to All, this command queries the maximum Estimated Carrier Power for the specified burst.

When the Burst Capture Range is set to Single, this command queries the maximum Burst Power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:MAXimum? 2 
! Query the maximum Estimated Carrier Power for burst 2.

Function

When the Burst Capture Range is set to All, this command queries the minimum Estimated Carrier Power for the specified burst.

When the Burst Capture Range is set to Single, this command queries the minimum Burst Power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:MINimum? 2 
! Query the minimum Estimated Carrier Power for burst 2.

Function

When the Burst Capture Range is set to All, this command queries the standard deviation of the Estimated Carrier Power for the specified burst.

When the Burst Capture Range is set to Single, this command queries the standard deviation of the Burst Power for the specified burst.

See Query the measurement results for a specified burst for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:SDEViation? 2 
! Query the standard deviation of the Estimated Carrier Power for burst 2.

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the average Estimated Carrier Power for all bursts in one frame.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:FRAMe? 
! Query the average Estimated Carrier Power for the whole frame.

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the maximum Estimated Carrier Power for all bursts in one frame from a multi-measurement.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:FRAMe:MAXimum? 
! Query the maximum Estimated Carrier Power for the whole frame.

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the minimum Estimated Carrier Power for all bursts in one frame from a multi-measurement.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:FRAMe:MINimum? 
! Query the minimum Estimated Carrier Power for the whole frame.

Function

This command is only applicable when the Burst Capture Range is set to All.

Queries the standard deviation of Estimated Carrier Power for all bursts in one frame from a multi-measurement.

See Query the measurement results for all bursts for more information.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.07 and above

Revision: E.01 and above

Programming Example

 
OUTPUT 714;"FETCh:TXPower:POWer:CARRier:FRAMe:SDEViation?" 
! Query the standard deviation of the Estimated Carrier Power for the whole frame.

Function

Queries the average transmit power for all bursts of the specified test sequence step.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:FRAMe? 2" 
! Query the average transmit power for all bursts of step 2. 

Function

Queries the maximum transmit power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:FRAMe:MAXimum? 2 
! Query the maximum transmit power for all bursts of step 2. 

Function

Queries the minimum transmit power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dBm

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:FRAMe:MINimum? 2 
! Query the minimum transmit power for all bursts of step 2. 

Function

Queries the standard deviation of the transmit power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:FRAMe:SDEViation? 2 
! Query the standard deviation of the transmit power for all bursts of step 2. 

Function

Queries the average estimated carrier power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:FRAMe? 2 
! Query the average estimated carrier power for all bursts of step 2. 

Function

Queries the maximum estimated carrier power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:FRAMe:MAXimum? 2 
! Query the maximum estimated carrier power for all bursts of step 2. 

Function

Queries the minimum estimated carrier power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:FRAMe:MINimum? 2 
! Query the minimum estimated carrier power for all bursts of step 2. 

Function

Queries the standard deviation of estimated carrier power for all bursts of the specified test sequence.

See Note 2 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:FRAMe:SDEViation? 2 
! Query the standard deviation of the estimated carrier power for all bursts of step 2. 

Function

Queries the average transmit power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer? 2,3 
! Query the average transmit power for burst 3 of step 2. 

Function

Queries the maximum transmit power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:MAXimum? 2,3 
! Query the maximum transmit power for burst 3 of step 2. 

Function

Queries the minimum transmit power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:MINimum? 2,3 
! Query the minimum transmit power for burst 3 of step 2. 

Function

Queries the standard deviation of transmit power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:BPOWer:SDEViation? 2,3 
! Query the standard deviation of the transmit power for burst 3 of step 2. 

Function

Queries the average estimated carrier power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer? 2,3 
! Query the average estimated carrier power for burst 3 of step 2. 

Function

Queries the maximum estimated carrier power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:MAXimum? 2,3 
! Query the maximum estimated carrier power for burst 3 of step 2. 

Function

Queries the minimum estimated carrier power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:MINimum? 2,3 
! Query the minimum estimated carrier power for burst 3 of step 2. 

Function

Queries the standard deviation of estimated carrier power for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer:SDEViation? 2,3 
! Query the standard deviation of the estimated carrier power for burst 3 of step 2. 

Function

Queries the integrity indicator for all bursts of the specified test sequence step. Zero indicates normal.

For non-zero integrity indicators, refer to Integrity Indicator .

The command contains a mandatory parameter which defines which step's results are to be queried. If the step number exceeds the range defined by Uplink Sequence Step Count, NANs are returned.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: See Integrity Indicator .

Resolution: 1

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:INTegrity? 2 
! Query the integrity indicator for all bursts of step 2. 

Function

Queries the modulation format for a specified burst of the specified test sequence step.

See Note 3 for more information on how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: GMSK | EPSK | MIXed | UNKNown

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:MODulation:FORMat? 2,3 
! Query the modulation format for burst 3 of step 2. 

Function

Queries the modulation format for all bursts of the specified test sequence step.

The command contains a mandatory parameter which defines which step's results are to be queried.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: GMSK | EPSK | MIXed | UNKNown.

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:SSTep:CPOWer? 2 
! Query the modulation format for all bursts of step 2. 

Function

Queries the average transmit power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:BPOWer? 3 
! Query the average transmit power for all the test sequence steps of burst 3. 

Function

Queries the maximum transmit power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:BPOWer:MAXimum? 3 
! Query the maximum transmit power for all the test sequence steps of burst 3. 

Function

Queries the minimum transmit power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:BPOWer:MINimum? 3 
! Query the minimum transmit power for all the test sequence steps of burst 3. 

Function

Queries the standard deviation of transmit power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:BPOWer:SDEViation? 3 
! Query the standard deviation of the transmit power for all the test sequence steps of burst 3. 

Function

Queries the average estimated carrier power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:CPOWer? 3 
! Query the average estimated carrier power for all the test sequence steps of burst 3. 

Function

Queries the maximum estimated carrier power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:CPOWer:MAXimum? 3 
! Query the maximum estimated carrier power for all the test sequence steps of burst 3. 

Function

Queries the minimum estimated carrier power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: -100 dBm to 100 dBm and 9.91 E+37 (NAN)

Resolution: 0.01 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:CPOWer:MINimum? 3 
! Query the minimum estimated carrier power for all the test sequence steps of burst 3. 

Function

Queries the standard deviation of estimated carrier power for all the test sequence steps of the specified burst.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: 0 dB to 100 dB and 9.91 E+37 (NAN)

Resolution: 0.001 dB

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:CPOWer:SDEViation? 3 
! Query the standard deviation of the estimated carrier power for all the test sequence 
! steps of burst 3. 

Function

Queries the overall integrity indicator for all bursts of each test sequence steps. Zero indicates normal.

For non-zero integrity indicators, refer to Integrity Indicator .

The query returns measurement results in the following order: <Result for Step 1>, <Result for Step 2>,..., <Result for Step 50>.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: See Integrity Indicator .

Resolution: 1

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:INTegrity? 
! Query the integrity indicator for all the test sequence steps. 

Function

Queries the modulation format for the specified burst across all test sequence steps.

See Note 1 for more information about how to use the command.

GPRS TA

EGPRS TA

GSM/GPRS LA

EGPRS LA

Query

Range: GMSK | EPSK | MIXed | UNKNown.

Revision: A.08 and above, with the required feature license.

Revision: E.02 and above.

Programming Example

 
OUTPUT 714;"FETCh:TXPower:TSEQuence:MODulation:FORMat? 3 
! Query the modulation format for all the test sequence steps of burst 3.