CALL:HSUPa

Function

Sets/queries the Primary E-RNTI (in Hex).

This setting determines the primary E-RNTI that is used on the E-AGCH. This is the ID that test set will use when it is to transmit data to the UE in Active Cell.

Setting

Range: 0 to FFFF

Query

Range: 0 to FFFF

*RST Setting

AAAA

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:ERNTi 'AAAA'"

Function

Sets/queries the UE Reported E-DCH Category.

Query

Range: 1-6, NAN

*RST Setting

NAN

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:MS:REPorted:EDCHannel:CATegory?"

Function

Queries the HSUPA Real Time Results in the following order:Exp MAC-e PDU Num, Throughput, ACKs, NACKS

Query

Range:

Exp MAC-e PDU Num: 0 to 200000 Blocks, 9.91E +37 (Null)

Throughput: 0 to 99999.999 Kbps, 9.91E +37 (Null)

ACKs: 0 to 200000 Blocks, 9.91E +37 (Null)

NACKS: 0 to 200000 Blocks, 9.91E +37 (Null)

*RST Setting

9.91E +37, 9.91E +37, 9.91E +37, 9.91E +37

Requirements

Test Application Revision: A.09.00 and above

Programming Example

"CALL:HSUPa:RTIMe:RESults:ALL?"

Function

Sets/queries the PS_Data_Channel_Configuration.

Setting

Range: FIXed | FLEXible

Query

Range: FIXed | FLEXible

*RST Setting

FIXed

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:CHANnel:CONFig FIXed"

Function

Sets/queries the E_PUCH_HS_PDSCH_Timeslot_Config.

Setting

Range: five character string with value of "U", "D", and "-"

"U" denotes the timeslot used for E-PUCH, "D" denotes the timeslot used for HS-PDSCH, and "-" denotes the timeslot is idle.

Note that "U" is in the front of "D", and at least one "U" and one "D" are required.

Query

Range: five character string with value of "U", "D", and "-"

*RST Setting

UUUD-

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:DATachannel:TSConfig UUUD-"

Function

Sets/queries the PS_Data_Control_Channel_DL_DPCH_Timeslot_Config.

Setting

Range: TS0 | TS6

Query

Range: TS0 | TS6

*RST Setting

TS0

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:DPCHannel:TSLot TS6"

Function

Sets/queries the PS_Data_E_PUCH_OVSF.

Setting

Range: SF1 | SF2 | SF4 | SF8 | SF16

Query

Range: SF1 | SF2 | SF4 | SF8 | SF16

*RST Setting

SF1

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:EPUChannel:OVSF SF16"

Function

Sets/queries the PS_Data_HS_PDSCH_Channel_Codes .

Setting

Range: 1 to 16

Query

Range: 1 to 16

*RST Setting

16

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:HSPDschannel:CCODe:NUMBer 16"

Function

Sets/queries the PS_Data_HS_PDSCH_OVSF.

Setting

Range: SF1 | SF16

Query

Range: SF1 | SF16

*RST Setting

SF1

Requirements

Test Application Revision: A.08.00 and above

Programming Example

"CALL:HSUPa:SERVice:PSData:HSPDschannel:OVSF SF16"

Function

Sets/queries the E-DCH FRC Type.

This is defined according to 3GPP TS 34.122 Annex C.6.1.2.1 to C.6.2.1.3.

This setting can only be changed while the Call Status is IDLE.

Setting

Range: FRC1a | FRC1b | FRC2 | FRC3

Query

Range: FRC1a | FRC1b | FRC2 | FRC3

*RST Setting

FRC3

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:SERVice:RBTest:FRC:TYPE FRC3"

Function

Sets/queries the E-DCH Max Number of Retransmission.

This setting determines the maximum number of retransmissions a HARQ process in the UE that will perform for a given block of data before giving up and moving onto a new block of data.

Setting

Range: 0 to 15

Query

Range: 0 to 15

*RST Setting

3

Requirements

Test Application Revision: A.04.00 and above

Programming Example

"CALL:HSUPa:SERVice:RBTest:HARQ:RETRans:MAXimum 3"

Function

Sets/queries the E-DCH Retransmission Timer.

This setting determines the retransmission timer a HARQ process in the UE that will wait for the acknowledgement of a given block of data before giving up and moving onto a new block of data.

Setting

Range: MS10 | MS15 | MS20 | MS25 | MS30 | MS35 | MS40 | MS45 | MS50 | MS55 | MS60 | MS65 | MS70 | MS75 | MS80 | MS85 | MS90 | MS95 | MS100 | MS110 | MS120 | MS140 | MS160 | MS200 | MS240 | MS280 | MS320 | MS400 | MS480 | MS560

Query

Range: MS10 | MS15 | MS20 | MS25 | MS30 | MS35 | MS40 | MS45 | MS50 | MS55 | MS60 | MS65 | MS70 | MS75 | MS80 | MS85 | MS90 | MS95 | MS100 | MS110 | MS120 | MS140 | MS160 | MS200 | MS240 | MS280 | MS320 | MS400 | MS480 | MS560

*RST Setting

MS60

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:SERVice:RBTest:HARQ:RETRans:TIMer MS60"

Function

Sets/queries the RB Test Mode Uplink E-DCH RLC SDU size.

This setting determines the uplink RLC SDU size specified for the E-DCH transport channel in the Close UE Test Loop message sent during a HSUPA RB Test Mode call. The default is chosen to ensure the maximum throughput under FRC2 can be achieved (in this case, the loopback RLC SDU would be just fit into 8 UM RLC PDUs. The E-DCH RLC SDU size to achieve maximum throughput under other FRCs is less than FRC2’s).

Setting

Range: 72 to 2608

Query

Range: 72 to 2608

*RST Setting

2608

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:SERVice:RBTest:RLCSdu:SIZE 2608"

Function

Sets/queries the E-AGCH Absolute Grant (Power) Value.

This parameter controls the next absolute grant that the test set will transmit to the UE on E-AGCH during a HSPA connection. The UE will interpret this value according to the Table 26A in 3GPP 25.222 s4.10.1.1.

Setting

Range: 0 ~ 31

Query

Range: 0 ~ 31

*RST Setting

31

Requirements

Test Application Revision: A.05.00 and above

Programming Example

"CALL:HSUPa:SGRant:ABSolute:VALue 31"