Last updated: 2010-03-10
For more information on the GPIB Command conventions, see GPIB Command conventions.
For the measurement, see Block Error Ratio (BLER) Measurement.
Function |
Queries the block error ratio measurement results in the following order: integrity, block error ratio, block error count, blocks tested, uplink missing blocks. |
Query |
Integrity
Block Error Ratio
Block Error Count
Blocks Tested
Uplink Missing Blocks
|
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCH:TBLerror?" |
Function |
Queries the tested blocks for the block error ratio measurement. |
Query |
Range:0 to 99000, 9.91 E+37 Resolution: 1 |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:BLOCks?" |
Function |
Queries the Block Error Count result for the block error ratio measurement. |
Query |
Range: 0 to 99000, 9.91 E+37 Resolution: 1 |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:COUNt?" |
Function |
Queries the the intermediate count of blocks tested in the block error ratio measurement. |
Query |
Range: |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:ICOunt?" |
Function |
Queries the integrity of the block error ratio measurement result. |
Query |
Range:see Integrity Indicator . Resolution: 1 |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:INTegrity?" |
Function |
Queries the Uplink Missing Blocks result for the block error ratio measurement. |
Query |
Range: 0 to 99000, 9.91 E+37 Resolution:1 |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:MBLocks?" |
Function |
Queries the Block Error Ratio result for the block error ratio measurement. |
Query |
Range: 0 to 99%, 9.91 E+37 Resolution: 0.01% |
Requirements |
Test Application Revision: A.03.00 and above |
Programming Example |
"FETCh:TBLerror:RATio?" |