Last updated: 2014-11-28
For more information on the GPIB Command conventions, see GPIB Command conventions
For the measurement, see Frequency Stability Measurement.
|
Function |
Sets/queries the additional filter for the frequency stability measurement. |
|
Setting |
Range: NONE|BWKH30 |
|
Query |
Range:NONE|BWKH30 |
|
*RST Setting |
NONE |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETup:FSTability:AFILter NONE" |
|
Function |
Sets/queries the trigger arm state for the frequency stability measurement. Determines whether measurement will make one measurement then stop (0|OFF (single)), or automatically rearm upon completion of one measurement and repeat the process (1|ON (continuous)). |
|
Setting |
Range: 1|ON|0|OFF |
|
Query |
Range: 1|0 |
|
*RST Setting |
0 (off) |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:CONTINUOUS ON" |
|
Function |
Sets/queries the number of frequency stability measurements to be made in a multi-measurement setup. This command sets the count, and automatically sets the multi-measurement STATe command to 1 (on). |
|
Setting |
Range: 1 to 999 |
|
Query |
Range: 1 to 999 |
|
*RST Setting |
10, on |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:COUNT:SNUMBER 5" |
|
Function |
Sets/queries the number of frequency stability measurements to be made when multi-measurement state is ON. |
|
Setting |
Range: 1 to 999 |
|
Query |
Range: 1 to 999 |
|
*RST Setting |
10 |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:COUNT:NUMBER 5" |
|
Function |
Sets/queries the multi-measurement state of the frequency stability measurement. |
|
Setting |
Range: 1|ON|0|OFF |
|
Query |
Range: 1|0 |
|
*RST Setting |
0 (off) |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:COUNT:STATE ON" |
|
Function |
Sets/queries the frequency stability measurement's timeout setting and automatically sets the timeout state to ON. |
|
Setting |
Range: 0.1 to 999.9 seconds Resolution: 0.1 second |
|
Query |
same as setting |
|
*RST Setting |
10 seconds, on |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:TIMEOUT:STIME 5S" |
|
Function |
Sets/queries the frequency stability measurement's timeout state. |
|
Setting |
Range: 1|ON|0|OFF |
|
Query |
Range: 1|0 |
|
*RST Setting |
0 (off) |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:TIMEOUT:STATE ON" |
|
Function |
Sets/queries the frequency stability measurement's timeout setting. |
|
Setting |
Range: 0.1 to 999.9 seconds Resolution: 0.1 second |
|
Query |
same as setting |
|
*RST Setting |
10 seconds, on |
|
Requirements |
Test Application Revision: A.01.00 and above |
|
Programming Example |
"SETUP:FSTABILITY:TIMEOUT:TIME 5S" |