Making 3GPP TS 34.121 Tests

This chapter demonstrates the step-by-step procedures for making many of the tests specified in the 3GPP TS 34.121 standard. The procedures for each test are based on one set of settings as specified for the test. However, the general setup procedures are the same for other sets of settings. To learn more about which tests are supported by the test set, see What 3GPP W-CDMA/HSPA Conformance Tests Are Supported? .

Measurement Procedures
Measurement	General Measurement Procedure	3GPP TS 34.121 Test Procedure
ACLR	How Do I Make an Adjacent Channel Leakage Ratio (ACLR) Measurement?	5.10 5.10A (lab application or feature-licensed test application only)
BLER	How Do I Make a Block Error Ratio (BLER) Measurement?	7.2.1 7.3.1: http://cp.literature.keysight.com/litweb/pdf/1000-1894.pdf
Change of TFC (lab application only)	How Do I Make a Change of TFC (Transport Format Combination) Measurement?	5.6: Measuring 3GPP TS 34.121 5.6 Change Of TFC
Channel Power	How Do I Make a Channel Power Measurement?	5.2A (lab application or feature-licensed test application only) : Measuring 3GPP TS 34.121 5.2A Maximum Output Power with HS-DPCCH 5.4.3: Measuring 3GPP TS 34.121 5.4.3 Minimum Output Power
Code Domain	How Do I Make a Code Domain Measurement?
Data Throughput Monitor (lab application only)	How Do I Use the Data Throughput Monitor?
Dynamic Power Analysis	How Do I Make a Dynamic Power Analysis Measurement?	5.7A (lab application or feature-licensed test application only) : Measuring 3GPP TS 34.121 v7.5.0 s5.7A HS-DPCCH
HSDPA BLER (lab application or feature-licensed test application only)	How Do I Make an HSDPA Block Error Ratio Measurement?	6.3A: Measuring 3GPP TS 34.121 6.3A Maximum Input Level for HS-PDSCH Reception (16QAM)
Inner Loop Power	How Do I Make an Inner Loop Power Measurement?	5.4.2: Measuring 3GPP TS 34.121 5.4.2 Inner Loop Power Control in the Uplink
IQ Tuning	How Do I Make an IQ Tuning Measurement?
Loopback BER	How Do I Make a Loopback Bit Error Ratio (BER) Measurement?	6.2 6.3
Occupied Bandwidth	How Do I Make an Occupied Bandwidth (OBW) Measurement?	5.8
Out-of-Synch Handling of Output Power (lab application only)	How Do I Make an Out-of-Synch Handling of Output Power Measurement?	5.4.4: Measuring 3GPP TS 34.121 5.4.4 Out-of-Synchronization Handling of Output Power
Phase Discontinuity	How Do I Make a Phase Discontinuity Measurement?	5.13.3
PRACH Preamble Analysis (lab application only)	How Do I Make a PRACH Preamble Analysis Measurement?	5.13.4
PRACH Transmit On/Off Power	How Do I Make a PRACH Transmit On/Off Power Measurement?	5.4.1: Measuring 3GPP TS 34.121 5.4.1 Open Loop Power Control in the Uplink 5.5.1: Measuring 3GPP TS 34.121 5.5.1 Transmit OFF Power 5.5.2: Measuring 3GPP TS 34.121 5.5.2 Transmit ON/OFF Time Mask
SEM	How Do I Make a Spectrum Emission Mask Measurement?	5.9 5.9A (lab application or feature-licensed test application only)
Spectrum Monitor	How Do I Use the Spectrum Monitor?
Thermal Power	How Do I Make a Thermal Power Measurement?	5.2: Measuring 3GPP TS 34.121 5.2 Maximum Output Power
TX Dynamic Power	How Do I Make a TX Dynamic Power Measurement?
Waveform Quality	How Do I Make a Waveform Quality Measurement?	5.3: Measuring 3GPP TS 34.121 5.3 Frequency Error 5.13.1 5.13.1A ( (lab application or feature-licensed test application only) : Measuring 3GPP TS 34.121 v7.5.0 s5.13.1A Error Vector Magnitude (EVM) with HS-DPCCH 5.13.2