UATI 024
Last updated: November 10, 2006
UATI 024 represents the lower 24 bits of the UATI assigned by the AN to the AT when a UATI Request is processed from the AT.
In the Active Cell operating mode
UATI 024 is sent in the UATI Assignment message (see TAP/ETAP Data Connection Call Flow ).
UATI 024 can be queried at any time, but a value will only be returned if a session is open (see
Session Open State
). The UATI 024 assigned to the access terminal by the test set is displayed on the
Call Setup
screen in the
Access Terminal Information (AN Assigned)
window.
In the Test operating mode
In the Test operating mode, you must set the UATI (UATI 024 and UATI color code) or Long Code Mask to be used.
There are four settings associated with the UATI in the Test operating mode.
When any of these user settings are set, the other settings are updated to reflect the last setting. The four settings will always be consistent with each other and represent the last input. After setting what you set is displayed on the Call Setup screen in the
Access Terminal Information
window.