CALL:PCAType

Last updated: December 3, 2008

Function	GSM TA	This command is not applicable to GSM.
	GPRS TA	This command sets/queries the type of burst used to carry Packet Control Acknowledgments. The settings for this command include: ACCess When this setting is selected, the test set sends the Packet Control Acknowledgment message on four access bursts. You can also configure the format of the access bursts (8-bit or 11-bit) by using the command CALL[:CELL]:(PBCCH\|PBCChannel):PRACh:LENGth . NORMal When this setting is selected, the test set sends the Packet Control Acknowledgment message on a normal RLC/MAC block. For more information, see Access Burst Type for Packet Control Acknowledgments .
	EGPRS TA
	GSM/GPRS LA
	EGPRS LA
Setting		Range: ACCess\|NORMal
Query		Range: ACC\|NORM
*RST Setting		NORM
Requirements	GSM/GPRS/ EGPRS LA	Revision: E.01 and above
Programming Example OUTPUT 714;"CALL:PCAType ACCess" ! Configures the test set to send the Control Acknowledgment on four access bursts.