Last updated: January 16, 2009
Queries the TX spurious emissions measurement results. This measurement returns results in the following order: integrity, TX spurious emissions pass/fail result, lower adjacent channel (-0.885 or -1.25 MHz) average TX spurious emissions, upper adjacent channel (+0.885 or +1.25 MHz) average TX spurious emissions, lower alternate channel (-1.98 MHz) average TX spurious emissions, upper alternate channel (+1.98 MHz) average TX spurious emissions. |
|
Test Application Revision: A.01.20 and above Lab Application Revision: A.01 and above |
|
TX spurious emissions pass/fail result Lower adjacent channel spurious emissions Upper adjacent channel spurious emissions |
|
OUTPUT 714;"FETCh:CTXSpurious?" |
Queries the lower second alternate result and upper second alternate result for the tx spurious emissions measurement test case 3. See TX Spurious Emissions Measurement Results . |
|
Lab Application Revision: C.00.00 and above | |
OUTPUT 714;"FETCh:CTXSpurious:EPOWer:ALTernate2:TEST3?" |
Queries the intermediate count of measurements completed in a multi-measurement. The multi-measurement state, by default, is off. To set up multi-measurements, see SETup:CTXSpurious:COUNt[:SNUMber] . |
|
Test Application Revision: A.01.20 and above Lab Application Revision: A.01 and above |
|
OUTPUT 714;"FETCh:CTXSpurious:ICOunt?" |
Function | Queries the pass/fail results. Pass/fail results are based on fixed limit lines on display. See TX Spurious Emissions Measurement Results . |
Test Application Revision: A.01.20 and above Lab Application Revision: A.01 and above |
|
OUTPUT 714;"FETCh:CTXSpurious:MASK?" |