Call Processing

This page provides links to descriptions of the numerous settings and operations available in the test set for base station emulation and call processing including: Call Control, Call Parms and Call Processing Information and Operations.

If you have trouble finding the information you need, use the search tab on the left to search the contents of this help.

Call Control

• Operating Mode

• Originate/End Call

• Paging Parameters

• Handovers

• Clear UE Info

• Downlink Channel Level (only applicable to TD-SCDMA Test operating mode)

• AWGN Power

• DL TFCI Pattern (only applicable to TD-SCDMA Test operating mode)

• Scrambling Code

• Cell Parameters

• Generator Info

• UE Timer and Constant Parms

• Channel Config Information

• Trig Output Setup

• Security Information

• UE Measurement Control

• Voice Call

• RB Test Mode Setup

• Short Message Service

• Data Channel

• Simultaneous Services

Call Parms

• Cell Power

• Channel Type

• Paging Service Type

• Channel

• HSPA Parameters (only applicable to the  feature-licensed test application)

• UE Transmit Power Control

• RF Gen Freq Ctrl

• DL DTCH Data

• Call Limit State

• Call Drop Timer

• DL PICH Data (only applicable to TD-SCDMA Test operating mode)

• UL DPCH TFCI Control (only applicable to TD-SCDMA Test operating mode)

• UL DPCH TFCI (only applicable to TD-SCDMA Test operating mode)

• MS DPCH Tgt Pwr

• UL CL Power Control

• Receiver Control

Call Processing Information and Operations

• Call Setup Screen

• Call Processing Ladder Diagrams

• Cell Power, AWGN Power and Total RF Power

• FM Broadcast

• GPRS Packet Data Service Ladder Diagrams

• Handover_Ladder_Diagrams

• Single channel GPS source

• Protocol Logging