Call Processing

Last updated: November 7, 2012

This page provides links to descriptions of the numerous settings and operations available in the test set for base station emulation and call processing including

If you have trouble finding the information you need in the links below, use the search field at the top of this page to search the contents of this guide. If you are new to using the test set, it may be helpful to review the Getting Started with Call Processing page.

For details about to which revisions of the 3GPP specifications the test set is compliant, see Test Adherence to Standards and What 3GPP TS 05.05 Requirements are supported? .

Test Set Operating Modes

Base Station Emulation Configuration


Call Control	Call Parms
Connection Types	Configuring the Broadcast Channel (BCH)
Establish a Connection with the Mobile Station Establishing an Active GSM Link with the Mobile Station Establishing a Data Connection with the Mobile Station Call Processing Ladder Diagrams	Configuring the Traffic Channel (TCH) Parameters Frequency Banded Parameters Band Selection Parameters Channel Mode Setup Configuring Mobile Station Operating Parameters Frequency Hopping Call Signaling Parameters (Lab Application Only) Dedicated Control Channel (DCCH) Features Calls via the SDCCH Combined and Non-Combined BCH/SDCCH Repeated Downlink FACCH Repeated SACCH Intra Cell Handover Voice services over Adaptive Multi-user channels on One Slot (VAMOS)
Paging Parameters	Configuring the Packet Data Traffic Channel (PDTCH) Frequency Banded Parameters Band Selection Parameters Bursted Parameters Downlink PDTCH Power Control Supported Multislot Classes Configuring Mobile Station Operating Parameters Modulation Coding Scheme (Active Cell operating mode) Modulation Coding Scheme/Puncturing Scheme (MCS/PS) (Test Mode operating mode) Frequency Hopping (Lab Application Only) Downlink Dual Carrier (Lab Application Only) TTI Mode Configuration (Lab Application Only) Fast Ack/Nack Reporting (Lab Application Only) Flexible Timeslot (Lab Application Only)
Cell Info Cell Operation Cell Parameters Cell Identification Parameters Cell Lists 3G FDD Neighbour Cells (Lab Application Only) 3G TDD Neighbour Cells (Lab Application Only)	Dual Transfer Mode
Protocol Logging	Handover Parameters
DUT PDP Setup	Receiver Control
Ping
Protocol Control (Lab Application Only) Temporary Block Flow (TBF) Parameters Delayed Downlink TBF Extended Uplink TBF TBF Re-establishment
Short Message Service (SMS) (Lab Application Only) Cell Broadcast Service (CBS)
Measurement Reports (Lab Application Only)
Digital Audio Interface (DAI) Description (Lab Application Only)
Real-Time Vocoder
Calling Party Number Parameters (Lab Application Only)
Network Identity and Time Zone (Lab Application Only)
EGPRS Switched Radio Block Loopback Sub-Mode (Lab Application Only)
E-UTRAN / GERAN Interworking (Lab Application Only)

Call Processing Status and Operations

How the Test Set Performs a Dualband Handover
External Trigger Setup
- Frame Triggers
- Protocol Message Based Triggers
- Neighbour Cell Synchronization Trigger (Lab Application Only)
- Demodulation Trigger Delay (Lab Application Only)
GSM/GPRS Control Program Example
E-OTD (Enhanced Observed Time Difference) (Lab Application Only)
A-GPS (Assisted-GPS) (Lab Application Only)
Configurable Timers (Lab Application Only)
Dual Transfer Mode (Lab Application Only)
UMA/GAN Test System (Lab Application Only)
Two-Cell Test System (Lab Application Only)
- Two-Cell Test System Ladder Diagrams (Lab Application Only)
Testing a GPRS Mobile Station
Mobile Calculated BER Test
FM Broadcast
Single Channel GPS Source
SMS over SGs (Lab Application Only)
Packet Paging (Lab Application Only)
Robust Header Compression (Lab Application Only)
Adaptive Multi-Rate (AMR) Feature Descriptions
Wideband Adaptive Multi-Rate (AMR-WB) Feature Descriptions
Adaptive Multi-Rate over O-TCH